Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-37
v1.0, July 2010
ipv6 ospf retransmit-interval
This command sets the OSPF retransmit Interval for the specified interface. The retransmit
interval is specified in seconds. The value for <seconds> is the number of seconds between
link-state advertisement retransmissions for adjacencies belonging to this router interface. This
value is also used when retransmitting database description and link-state request packets. Valid
values range from 0 to 3600 (1 hour).
no ipv6 ospf retransmit-interval
This command sets the default OSPF retransmit Interval for the specified interface.
ipv6 ospf transmit-delay
This command sets the OSPF Transit Delay for the specified interface. The transmit delay is
specified in seconds. In addition, it sets the estimated number of seconds it takes to transmit a link
state update packet over this interface. Valid values for <seconds> range from 1 to 3600 (1
hour).
Format no ipv6 ospf priority
Mode Interface Config
Default 5
Format ipv6 ospf retransmit-interval
<seconds>
Mode Interface Config
Format no ipv6 ospf retransmit-interval
Mode Interface Config
Default 1
Format ipv6 ospf transmit-delay
<seconds>
Mode Interface Config
To Next Page
Loading...
