NETGEAR GSM7228PS - Set Gvrp Interfacemode; Show Gvrp Configuration

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-60
v1.0, July 2010
set gvrp interfacemode
This command enables GVRP on a single port (Interface Config mode) or all ports (Global Config
mode).
no set gvrp interfacemode
This command disables GVRP on a single port (Interface Config mode) or all ports (Global Config
mode). If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.
show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or
all interfaces.
Format no set gvrp adminmode
Mode Privileged EXEC
Default disabled
Format set gvrp interfacemode
Mode • Interface Config
• Global Config
Format no set gvrp interfacemode
Mode • Interface Config
• Global Config
Format show gvrp configuration {<unit/slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.