NETGEAR GSM7228PS - Dot1 X User

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-71
v1.0, July 2010
no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
dot1x user
This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Default 0
Format dot1x unauthenticated-vlan <vlan id>
Mode Interface Config
Format no dot1x unauthenticated-vlan
Mode Interface Config
Format dot1x user <user> {<unit/slot/port> | all}
Mode Global Config
Format no dot1x user <user> {<unit/slot/port> | all}
Mode Global Config