Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-83
v1.0, July 2010
no enable (RIP)
This command sets the administrative mode of RIP in the router to inactive.
ip rip
This command enables RIP on a router interface.
no ip rip
This command disables RIP on a router interface.
auto-summary
This command enables the RIP auto-summarization mode.
no auto-summary
This command disables the RIP auto-summarization mode.
Format no enable
Mode Router RIP Config
Default disabled
Format ip rip
Mode Interface Config
Format no ip rip
Mode Interface Config
Default disabled
Format auto-summary
Mode Router RIP Config
Format no auto-summary
Mode Router RIP Config
To Next Page
Loading...
