Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-110
v1.0, July 2010
show lacp partner
Use this command to display LACP partner attributes.
The following output parameters are displayed.
show port-channel brief
This command displays the static capability of all port-channel (LAG) interfaces on the device as
well as a summary of individual port-channel interfaces.
Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.
Format show lacp actor {<unit/slot/port>|all}
Mode Privileged EXEC
Parameter Description
System Priority The administrative value of priority associated with the Partner’s System ID.
System ID The value representing the administrative value of the Aggregation Port’s protocol
Partner’s System ID.
Admin Key The administrative value of the Key for the protocol Partner.
Port Priority The administrative value of the port priority for the protocol Partner.
Port-ID The administrative value of the port number for the protocol Partner.
Admin State The administrative values of the actor state for the protocol Partner.
Format show port-channel brief
Mode • Privileged EXEC
• User EXEC
Parameter Description
To Next Page
Loading...
Need help?
General
