NETGEAR GSM7228PS - Logging Buffered Wrap; Logging Cli-Command

Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-19
v1.0, July 2010
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full capacity.
Otherwise when the log file reaches full capacity, logging stops.
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when the
log file capacity is full.
logging cli-command
This command enables the CLI command logging feature, which enables the 7000 series software
to log all CLI commands issued on the system.
no logging cli-command
This command disables the CLI command Logging feature.
Default enabled
Format logging buffered wrap
Mode Privileged EXEC
Format no logging buffered wrap
Mode Privileged EXEC
Default enabled
Format logging cli-command
Mode Global Config
Format no logging cli-command
Mode Global Config