NETGEAR GSM7228PS - Show Radius Statistics

Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-65
v1.0, July 2010
(Switch) #show radius accounting statistics name Default_RADIUS_Server
RADIUS Accounting Server Name................. Default_RADIUS_Server
Host Address.................................. 192.168.37.200
Round Trip Time............................... 0.00
Requests...................................... 0
Retransmissions............................... 0
Responses..................................... 0
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
show radius statistics
This command displays the summary statistics of configured RADIUS Authenticating servers.
Format show radius statistics {<ipaddr|dnsname> | name <servername>}
Mode Privileged EXEC
Term Definition
ipaddr The IP address of the server.
dnsname The DNS name of the server.
servername The alias name to identify the server.
RADIUS Server Name The name of the authenticating server.
Server Host Address The IP address of the host.
Access Requests The number of RADIUS Access-Request packets sent to this server. This number
does not include retransmissions.
Access
Retransmissions
The number of RADIUS Access-Request packets retransmitted to this RADIUS
authentication server.
Access Accepts The number of RADIUS Access-Accept packets, including both valid and invalid
packets, that were received from this server.
Access Rejects The number of RADIUS Access-Reject packets, including both valid and invalid
packets, that were received from this server.
Access Challenges The number of RADIUS Access-Challenge packets, including both valid and invalid
packets, that were received from this server.