EasyManua.ls Logo

NETGEAR GSM7228PS - Show Sflow Samplers; Software License Commands

NETGEAR GSM7228PS
788 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-89
v1.0, July 2010
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Software License Commands
Release 8.0.3 allows the switches (GSM73xxSv1 and GSM72xxPS) to be licensed such that this
switch can configure advanced features.
This following table lists the software license matrix for all GSM series of switches:
Note: Software license will only be available on the Master unit if GSM72xxPS or GSM73xxSv1
is the Master of the stack. It will not be available in case GSM73xxSv2 is the Master of a
Stack.
Format show sflow samplers
Mode Privileged EXEC
Field Description
Sampler Data
Source
The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical
ports only.
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling
Rate
The statistical sampling rate for packet sampling from this source.
Max Header Size The maximum number of bytes that should be copied from a sampled packet to form a
flow sample.
Switch IPv4 Routing IPv6 Routing IP Multicast
GSM73xxSv2 Available Available Available
GSM72xxPS Licensed Licensed Licensed
GSM73xxSv1 Available Licensed Licensed

Table of Contents

Other manuals for NETGEAR GSM7228PS

Related product manuals