NETGEAR GSM7228PS - Snmp-Server Community Mode; Snmp-Server Community Ro

Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-43
v1.0, July 2010
no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the
applicable community name. The community name may be up to 16 alphanumeric characters.
snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP manager
associated with this community manages the switch according to its access right. If the community
is disabled, no SNMP requests using this community are accepted. In this case the SNMP manager
associated with this community cannot manage the switch until the Status is changed back to
Enable.
no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP requests
using this community are accepted. In this case the SNMP manager associated with this
community cannot manage the switch until the Status is changed back to Enable.
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also called
public).
Format no snmp-server community ipmask <name>
Mode Global Config
Default • private and public communities - enabled
• other four - disabled
Format snmp-server community mode <name>
Mode Global Config
Format no snmp-server community mode <name>
Mode Global Config
Format snmp-server community ro <name>
Mode Global Config