NETGEAR GSM7228PS - Show Captive-Portal User; User Max-Total-Octets

Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-29
v1.0, July 2010
no user max-output-octets
Use this command to reset the limit to the default.
user max-total-octets
Use this command to limit the number of bytes the user is allowed to transmit and receive. The
maximum number of octets is the sum of octets transmitted and received. After this limit has been
reached the user will be disconnected. <1-128> is the user ID. The range of octets is 0-
4294967295. 0 indicates to use the global limit .Use the “no” form of this command to reset the
limit to the default.
no user max-total-octets
Use this command to reset the limit to the default.
show captive-portal user
Use this command to display all configured users or a specific user in the captive portal local user
database.
Default 0
Format no user <1-128> max-output-octets
Mode Captive Portal Configuration mode
Default 0
Format user <1-128> max-total-octets octets
Mode Captive Portal Configuration mode
Format no user <1-128> max-total-octets
Mode Captive Portal Configuration mode