NETGEAR GSM7228PS - Ipv6 Mld-Proxy Reset-Status; Ipv6 Mld-Proxy Unsolicit-Rprt-Interval; Show Ipv6 Mld-Proxy

Managed Switch CLI Manual, Release 8.0.3
IPv6 Multicast Commands 6-24
v1.0, July 2010
ipv6 mld-proxy unsolicit-rprt-interval
Use this command to set the unsolicited report interval for the MLD-Proxy router. This command
is only valid when you enable MLD-Proxy on the interface. The value of <interval> is 1-260
seconds.
no ipv6 mld-proxy unsolicited-report-interval
Use this command to reset the MLD-Proxy router’s unsolicited report interval to the default value.
ipv6 mld-proxy reset-status
Use this command to reset the host interface status parameters of the MLD-Proxy router. This
command is only valid when you enable MLD-Proxy on the interface.
show ipv6 mld-proxy
Use this command to display a summary of the host interface status parameters.
The command displays the following parameters only when you enable MLD-Proxy.
Default 1
Format ipv6 mld-proxy unsolicit-rprt-interval <interval>
Mode Interface Config
Format no ipv6 mld-proxy unsolicit-rprt-interval
Mode Interface Config
Format ipv6 mld-proxy reset-status
Mode Interface Config
Format show ipv6 mld-proxy
Mode • Privileged EXEC
• User EXEC