NETGEAR GSM7228PS - Show Radius Accounting Statistics

Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-63
v1.0, July 2010
The following shows example CLI display output for the command.
(Switch) #show radius accounting name
Host Address Server Name Port Secret
Configured
----------------------- --------------------------------- -------- -----------
192.168.37.200 Network1_RADIUS_Server 1813 Yes
192.168.37.201 Network2_RADIUS_Server 1813 No
192.168.37.202 Network3_RADIUS_Server 1813 Yes
192.168.37.203 Network4_RADIUS_Server 1813 No
(Switch) #show radius accounting name Default_RADIUS_Server
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.200
RADIUS Accounting Mode................. Disable
Port .................................. 1813
Secret Configured ..................... Yes
show radius accounting statistics
This command displays a summary of statistics for the configured RADIUS accounting servers.
Server Name The name of the accounting server.
Port The port used for communication with the accounting server.
Secret Configured Yes or No Boolean value indicating whether this server is configured with a secret.
Format show radius accounting statistics {<ipaddr|dnsname> | name
<servername>}
Mode Privileged EXEC
Term Definition
ipaddr The IP address of the server.
dnsname The DNS name of the server.
servername The alias name to identify the server.
Term Definition