NETGEAR GSM7228PS - Show Voice Vlan; Voice Vlan Data Priority

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-50
v1.0, July 2010
no voice vlan (Interface Config)
Use this command to disable the Voice VLAN capability on the interface.
voice vlan data priority
Use this command to either trust or untrust the data traffic arriving on the Voice VLAN port.
show voice vlan
When the interface parameter is not specified, only the global mode of the Voice VLAN is
displayed.
When the interface is specified:
none Allow the IP phone to use its own configuration to send untagged voice traffic.
untagged Configure the phone to send untagged voice traffic.
Format no voice vlan
Mode Interface Config
Default trust
Format voice vlan data priority {untrust | trust}
Mode Interface Config
Format show voice vlan [interface {<unit/slot/port> | all}]
Mode Privileged EXEC
Term Definition
Administrative
Mode
The Global Voice VLAN mode.
Parameter Description