Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-60
v1.0, July 2010
The following shows example CLI display output for the command.
(Switch)#show radius
Number of Configured Authentication Servers............. 32
Number of Configured Accounting Servers................. 32
Number of Named Authentication Server Groups............ 15
Number of Named Accounting Server Groups................ 3
Number of Retransmits................................... 4
Time Duration........................................... 10
RADIUS Accounting Mode.................................. Disable
RADIUS Attribute 4 Mode................................. Enable
RADIUS Attribute 4 Value ............................... 192.168.37.60
show radius servers
This command displays the summary and details of RADIUS authenticating servers configured for
the RADIUS client.
Number of Retransmits The configured value of the maximum number of times a request packet is
retransmitted.
Time Duration The configured timeout value, in seconds, for request re-transmissions.
RADIUS Accounting Mode A global parameter to indicate whether the accounting mode for all the servers
is enabled or not.
RADIUS Attribute 4 Mode A global parameter to indicate whether the NAS-IP-Address attribute has been
enabled to use in RADIUS requests.
RADIUS Attribute 4 Value A global parameter that specifies the IP address to be used in the NAS-IP-
Address attribute to be used in RADIUS requests.
Format show radius servers [ { <ipaddr | dnsname> | name [<servername> ] } ]
Mode Privileged EXEC
Field Description
ipaddr The IP address of the authenticating server.
dnsname The DNS name of the authenticating server.
servername The alias name to identify the server.
Current The ‘*’ symbol preceeding the server host address specifies that the server is
currently active.
Term Definition
To Next Page
Loading...
