7300S Managed Switches CLI Manual, Version 8.0.3
x
v1.0, July 2010
Scope
This manual covers the layer 3 managed switches (GSM7328S, GSM7352S, GSM7328FS,
GSM7328Sv2, and GSM7352Sv2). Some of the commands described in this manual can only be
used on GSM7328Sv2 and GSM7352Sv2 switches. These commands are noted in text.
The following figure shows the GSM7328S and GSM7352S switches. Newer documentation
refers to these two switches as GSM7328Sv1 and GSM7352Sv1. Also shown are the
GSM7328Sv2 and GSM7352Sv2 switches.
Version 1 Switches
Version 2 Switches
GSM7328Sv1
GSM7352Sv1
GSM7328Sv2
GSM7352Sv2
To Next Page
Loading...
