NETGEAR GSM7228PS User Manual

Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-42
v1.0, July 2010
no area stub(OSPFv3)
This command deletes a stub area for the specified area ID.
area stub no-summary (OSPFv3)
This command disables the import of Summary LSAs for the stub area identified by <areaid>.
no area stub no-summary(OSPFv3)
This command sets the Summary LSA import mode to the default for the stub area identified by
<areaid>.
area virtual-link (OSPFv3)
This command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format area <areaid> stub
Mode Router OSPFv3 Config
Format no area <areaid> stub
Mode Router OSPFv3 Config
Default enabled
Format area <areaid> stub no-summary
Mode Router OSPFv3 Config
Format no area <areaid> stub summarylsa
Mode Router OSPFv3 Config
Format area <areaid> virtual-link <neighbor>
Mode Router OSPFv3 Config

NETGEAR GSM7228PS Specifications

General

Brand	NETGEAR
Model	GSM7228PS
Category	Switch
Language	English