Managed Switch CLI Manual, Release 8.0.3
Log Messages 11-6
v1.0, July 2010
Management
Table 11-8: TACACS+ Log Messages
Component Message Cause
TACACS+ TACACS+: authentication error, no server to
contact
TACACS+ request needed, but no servers
are configured.
TACACS+ TACACS+: connection failed to server
x.x.x.x
TACACS+ request sent to server x.x.x.x but
no response was received.
TACACS+ TACACS+: no key configured to encrypt
packet for server x.x.x.x
No key configured for the specified server.
TACACS+ TACACS+: received invalid packet type from
server.
Received packet type that is not supported.
TACACS+ TACACS+: invalid major version in received
packet.
Major version mismatch.
TACACS+ TACACS+: invalid minor version in received
packet.
Minor version mismatch.
Table 11-9: LLDP Log Message
Component Message Cause
LLDP lldpTask(): invalid message type:xx.
xxxxxx:xx
Unsupported LLDP packet received.
Table 11-10: SNTP Log Message
Component Message Cause
SNTP SNTP: system clock synchronized on %s
UTC
Indicates that SNTP has successfully
synchronized the time of the box with the
server.
Table 11-11: SNMP Log Message
Component Message Cause
SNMP EDB Callback: Unit Join: x. A new unit has joined the stack.
To Next Page
Loading...
