EasyManua.ls Logo

NETGEAR GSM7228PS - Page 706

NETGEAR GSM7228PS
788 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Managed Switch CLI Manual, Release 8.0.3
Log Messages 11-5
v1.0, July 2010
Table 11-7: RADIUS Log Messages
Component Message Cause
RADIUS RADIUS: Invalid data length - xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to send the request A problem communicating with the RADIUS
server.
RADIUS RADIUS: Failed to send all of the request A problem communicating with the RADIUS
server during transmit.
RADIUS RADIUS: Could not get the Task Sync
semaphore!
Resource issue with RADIUS Client service.
RADIUS RADIUS: Buffer is too small for response
processing
RADIUS Client attempted to build a
response larger than resources allow.
RADIUS RADIUS: Could not allocate accounting
requestInfo
Resource issue with RADIUS Client service.
RADIUS RADIUS: Could not allocate requestInfo Resource issue with RADIUS Client service.
RADIUS RADIUS: osapiSocketRecvFrom returned
error
Error while attempting to read data from the
RADIUS server.
RADIUS RADIUS: Accounting-Response failed to
validate, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: User (xxx) needs to respond for
challenge
An unexpected challenge was received for a
configured user.
RADIUS RADIUS: Could not allocate a buffer for the
packet
Resource issue with RADIUS Client service.
RADIUS RADIUS: Access-Challenge failed to
validate, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to validate Message-
Authenticator, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Access-Accpet failed to validate,
id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Invalid packet length – xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Response is missing Message-
Authenticator, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Server address doesn't match
configured server
RADIUS Client received a server response
from an unconfigured server.

Table of Contents

Other manuals for NETGEAR GSM7228PS

Related product manuals