Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-72
v1.0, July 2010
dns-server (IPv6)
This command sets the ipv6 DNS server address which is provided to dhcpv6 client by dhcpv6
server. DNS server address is configured for stateless server support. DHCPv6 pool can have
multiple number of domain names with maximum of 8.
no dns-server
This command will remove DHCPv6 server address from DHCPv6 server.
prefix-delegation (IPv6)
Multiple IPv6 prefixes can be defined within a pool for distributing to specific DHCPv6 Prefix
delegation clients. Prefix is the delegated IPv6 prefix. DUID is the client's unique DUID value
(Example: 00:01:00:09:f8:79:4e:00:04:76:73:43:76'). Name is 31 characters textual client’s name
which is useful for logging or tracing only. Valid lifetime is the valid lifetime for the delegated
prefix in seconds and preferred lifetime is the preferred lifetime for the delegated prefix in
seconds.
no prefix-delegation
This command deletes a specific prefix-delegation client.
Format dns-server <dns-server-address>
Mode IPv6 DHCP Pool Config
Format no dns-server <dns-server-address>
Mode IPv6 DHCP Pool Config
Default • valid-lifetime—2592000
• preferred-lifetime—604800
Format prefix-delegation
<prefix/prefixlength> <DUID> [name <hostname>]
[valid-lifetime <0-4294967295>][preferred-lifetime < 0-4294967295>]
Mode IPv6 DHCP Pool Config
Format no prefix-delegation <prefix/prefix-delegation> <DUID>
Mode IPv6 DHCP Pool Config
To Next Page
Loading...
