Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-25
v1.0, July 2010
no ip http secure-session maxsessions
This command restores the number of allowable secure HTTP sessions to the default value.
ip http secure-session soft-timeout
This command configures the soft timeout for secure HTTP sessions in minutes. Configuring this
value to zero will give an infinite soft-timeout. When this timeout expires, you are forced to re-
authenticate. This timer begins on initiation of the Web session and is re-started with each access
to the switch. The secure-session soft-timeout can not be set to zero (infinite).
no ip http secure-session soft-timeout
This command restores the soft timeout for secure HTTP sessions to the default value.
ip http secure-session hard-timeout
This command configures the hard timeout for secure HTTP sessions in hours. When this timeout
expires, the user is forced to re-authenticate. This timer begins on initiation of the Web session and
is unaffected by the activity level of the connection. The secure-session hard-timeout can not be set
to zero (infinite).
Format no ip http secure-session maxsessions
Mode Privileged EXEC
Default 5
Format ip http secure-session soft-timeout <1-60>
Mode Privileged EXEC
Format no ip http secure-session soft-timeout
Mode Privileged EXEC
Default 24
Format ip http secure-session hard-timeout <1-168>
Mode Privileged EXEC
To Next Page
Loading...
