Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-61
v1.0, July 2010
www.stanford.edu 72 3 IP 171.64.14.203
Packet Capture Commands
Packet capture commands assist in troubleshooting protocol-related problems with the
management CPU. The packets to and from the management CPU can be captured in an internally
allocated buffer area for export to a PC host for protocol analysis. Public domain packet analysis
tools like Ethereal can be used to decode and review the packets in detail. Capturing can be
performed in a variety of modes, either transmit-side only, receive-side only, or both. The number
of packets captured will depend on the size of the captured packets.
capture transmit packet
This command enables the capturing of transmit packets.
no capture transmit packet
This command disables the capturing of transmit packets.
capture receive packet
This command enables the capturing of receive packets.
Format capture transmit packet
Mode Global Config
Format no capture transmit packet
Mode Global Config
Format capture receive packet
Mode Global Config
To Next Page
Loading...
Need help?
General
