NETGEAR GSM7228PS - Arp Access-List; Permit Ip Host Mac Host

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-135
v1.0, July 2010
arp access-list
Use this command to create an ARP ACL.
no arp access-list
Use this command to delete a configured ARP ACL.
permit ip host mac host
Use this command to configure a rule for a valid IP address and MAC address combination used in
ARP packet validation.
no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Format arp access-list acl-name
Mode Global Config
Format no arp access-list acl-name
Mode Global Config
Format permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config
Format no permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config