NETGEAR GSM7228PS - Passwords Min-Length; Show Users Login-History

Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-34
v1.0, July 2010
show users login-history
This command is used to display the users who have logged in previously.
passwords min-length
Use this command to enforce a minimum password length for local users. The value also applies to
the enable password. The valid range is 0-64.
no passwords min-length
Use this command to set the minimum password length to the default value.
Term Definition
User Name The full name of the user.
Format show users login-history [{user name}]
Mode Privileged EXEC
Term Definition
Login Time The time at which the user logged in.
Username The user name used to login.
Protocol The protocol that the user used to login.
Location The location of the user.
Default 8
Format passwords min-length <0-64>
Mode Global Config
Format no passwords min-length
Mode Global Config