NETGEAR GSM7228PS - Spanning-Tree Bpduflood; Spanning-Tree Bpduguard

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-12
v1.0, July 2010
spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
Default enabled
Format no spanning-tree bpdufilter default
Mode Global Config
Default disabled
Format spanning-tree bpduflood
Mode Interface Config
Default enabled
Format no spanning-tree bpduflood
Mode Interface Config
Format spanning-tree bpduguard
Mode Global Config