NETGEAR GSM7228PS - Clear Lldp Remote-Data; Show Lldp; Show Lldp Interface

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-175
v1.0, July 2010
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-
related information.
show lldp
Use this command to display a summary of the current LLDP configuration.
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface
or for all interfaces.
Format clear lldp remote-data
Mode Global Config
Format show lldp
Mode Privileged Exec
Term Definition
Transmit
Interval
How frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold
Multiplier
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Re-initialization
Delay
The delay before re-initialization, in seconds.
Notification
Interval
How frequently the system sends remote data change notifications, in seconds.
Format show lldp interface {<unit/slot/port> | all}
Mode Privileged Exec
Term Definition
Interface The interface in a unit/slot/port format.
Link Shows whether the link is up or down.