NETGEAR GSM7228PS - Clear Isdp Counters; Clear Isdp Table; Isdp Enable; Show Isdp

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-208
v1.0, July 2010
isdp enable
This command enables ISDP on the interface.
no isdp enable
This command disables ISDP on the interface.
clear isdp counters
This command clears ISDP counters.
clear isdp table
This command clears entries in the ISDP table.
show isdp
This command displays global ISDP settings.
Default Enabled
Format isdp enable
Mode Interface Config
Format no isdp enable
Mode Interface Config
Format clear isdp counters
Mode Privileged EXEC
Format clear isdp table
Mode Privileged EXEC
Format show isdp
Mode Privileged EXEC