NETGEAR GSM7228PS - Ipv6 Pimsm Ssm; Show Ipv6 Pimsm

Managed Switch CLI Manual, Release 8.0.3
IPv6 Multicast Commands 6-13
v1.0, July 2010
ipv6 pimsm ssm
Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses.
no ipv6 pimsm ssm
This command is used to disable the Source Specific Multicast (SSM) range.
show ipv6 pimsm
This command displays the system-wide information for PIM-SM.
Default disabled
Format ipv6 pimsm ssm {default | <group-address/prefixlength> <group-mask>}
Mode Global Config
Parameter Description
default Defines the SSM range access list to 232/8.
Format no ipv6 pimsm ssm
Mode Global Config
Format show ipv6 pimsm
Modes • Privileged EXEC
• User EXEC
Term Definition
PIM-SM Admin
Mode
Indicates whether PIM-SM is enabled or disabled.
Data Threshold
Rate (Kbps)
The data threshold rate for the PIM-SM router.
Register
Threshold Rate
(Kbps)
The threshold rate for the RP router to switch to the shortest path.
SSM Range Table
Group Address/
Prefix Length
The Group IPv6 address and prefix length.