Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-58
v1.0, July 2010
no ip host
Use this command to remove the name-to-address mapping.
ipv6 host
Use this command to define static host name-to-IPv6 address mapping in the host cache. <name>
is host name. <v6 address> is the IPv6 address of the host.
no ipv6 host
Use this command to remove the static host name-to-IPv6 address mapping in the host cache.
ip domain retry
Use this command to specify the number of times to retry sending Domain Name System (DNS)
queries. The parameter <number> indicates the number of times to retry sending a DNS query to
the DNS server. This number ranges from 0 to 100.
Format no ip host <name>
Mode Global Config
Default none
Format ipv6 host <name> <v6 address>
Mode Global Config
Format no ipv6 host <name>
Mode Global Config
Default 2
Format ip domain retry <number>
Mode Global Config
To Next Page
Loading...
