Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-13
v1.0, July 2010
locale
This command is not intended to be a user command. The administrator must use the WEB UI to
create and customize captive portal web content. This command is primarily used by the show
running-config command and process as it provides the ability to save and restore configurations
using a text based format.
no locale
This command is intended to delete a locale. The default locale cannot be deleted.
interface (Captive Portal)
Use this command to associate an interface with a captive portal configuration.
no interface
Use this command to remove an association with a captive portal configuration.
Format no idle-timeout
Mode Captive Portal Instance mode
Default 1
Format locale <1-5>
Mode Captive Portal Instance mode
Format no locale <1-5>
Mode Captive Portal Instance mode
Format interface <unit/slot/port>
Mode Captive Portal Instance Config mode
To Next Page
Loading...
