NETGEAR GSM7228PS - Ip Pim-Trapflags; Ip Pimsm Ssm

Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-22
v1.0, July 2010
ip pimsm ssm
Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses.
no ip pimsm ssm
This command is used to disable the Source Specific Multicast (SSM) range.
ip pim-trapflags
This command enables the PIM trap mode for both Sparse Mode (SM) and Dense Mode. (DM).
no ip pim-trapflags
This command sets the PIM trap mode to the default.
Default disabled
Format ip pimsm ssm {default | <group-address> <group-mask>}
Mode Global Config
Parameter Description
default-range Defines the SSM range access list to 232/8.
Format no ip pimsm ssm
Mode Global Config
Default disabled
Format ip pim-trapflags
Mode Global Config
Format no ip pim-trapflags
Mode Global Config