NETGEAR GSM7228PS - Redistribute (Rip)

Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-88
v1.0, July 2010
no split-horizon
This command sets the default RIP split horizon mode.
redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/
routers. There are five possible match options. When you submit the command redistribute ospf
match <match-type> the match-type or types specified are added to any match types presently
being redistributed. Internal routes are redistributed by default.
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Format split-horizon {none | simple | poison}
Mode Router RIP Config
Format no split-horizon
Mode Router RIP Config
Default • metric—not-configured
• match—internal
Format for
OSPF as
source
protocol
redistribute ospf [metric <0-15>] [match [internal] [external 1]
[external 2] [nssa-external 1] [nssa-external-2]]
Format for
other source
protocol
redistribute {static | connected} [metric <0-15>]
Mode Router RIP Config
Format no redistribute {ospf | static | connected} [metric] [match [internal]
[external 1] [external 2] [nssa-external 1] [nssa-external-2]]
Mode Router RIP Config