Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-21
v1.0, July 2010
no spanning-tree mst vlan
This command removes an association between a multiple spanning tree instance and one or more
VLANs so that the VLAN(s) are again associated with the common and internal spanning tree.
spanning-tree port mode
This command sets the Administrative Switch Port State for this port to enabled.
no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
Format no spanning-tree mst vlan <mstid> <vlanid>
Mode Global Config
Default disabled
Format spanning-tree port mode
Mode Interface Config
Format no spanning-tree port mode
Mode Interface Config
Default disabled
Format spanning-tree port mode all
Mode Global Config
To Next Page
Loading...
