Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-59
v1.0, July 2010
no ip domain retry
Use this command to return to the default.
ip domain timeout
Use this command to specify the amount of time to wait for a response to a DNS query. The
parameter <seconds> specifies the time, in seconds, to wait for a response to a DNS query.
<seconds> ranges from 0 to 3600.
no ip domain timeout
Use this command to return to the default setting.
clear host
Use this command to delete entries from the host name-to-address cache. This command clears the
entries from the DNS cache maintained by the software. This command clears both IPv4 and IPv6
entries.
Format no ip domain retry <number>
Mode Global Config
Default 3
Format ip domain timeout <seconds>
Mode Global Config
Format no ip domain timeout <seconds>
Mode Global Config
Format clear host {<name> | all}
Mode Privileged EXEC
Field Description
name A particular host entry to remove. <name> ranges from 1-255 characters.
all Removes all entries.
To Next Page
Loading...
Need help?
General
