NETGEAR GSM7228PS - User Group Name; User Group Rename

Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-32
v1.0, July 2010
no user group
Use this command to delete a user group. The default user group (1) cannot be deleted.
user group name
Use this command to configure a group name. <1-10> is the user group ID. The name can be a
string up to 32 characters.
user group rename
Use this command to change a group's ID to a different group ID.
Default 1
Format user group <1-10>
Mode Captive Portal Configuration mode
Format user group <1-10>
Mode Captive Portal Configuration mode
Format user group <1-10> name name
Mode Captive Portal Configuration mode
Format user group group-id rename new-group-id
Mode Captive Portal Configuration mode