5-1
v1.0, July 2010
Chapter 5
IP Multicast Commands
This chapter describes the IP Multicast commands available in the managed switch CLI.
The IP Multicast Commands chapter contains the following sections:
• “Multicast Commands” on page 5-1
• “DVMRP Commands” on page 5-7
• “PIM-DM Commands” on page 5-12
• “PIM-SM Commands” on page 5-16
• “Internet Group Message Protocol (IGMP) Commands” on page 5-26
• “IGMP Proxy Commands” on page 5-35
Multicast Commands
This section describes the commands you use to configure IP Multicast and to view IP Multicast
settings and statistics.
Warning: The commands in this chapter are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
To Next Page
Loading...
