Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-94
v1.0, July 2010
no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
lacp actor admin
Use this command to configure the LACP actor admin parameters.
lacp actor admin key
Use this command to configure the administrative value of the LACP actor admin key. The valid
range for <key> is 0-65535.
no lacp actor admin key
Use this command to configure the default administrative value of the key.
Format no lacp collector max-delay
Mode Interface Config
Default Internal Interface Number of this Physical Port
Format lacp actor admin key <key>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp actor admin key
Mode Interface Config
To Next Page
Loading...
Need help?
General
