Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-13
v1.0, July 2010
no ip pimdm (Global Config)
This command disables the administrative mode of PIM-DM in the router.
ip pimdm (Interface Config)
This command sets administrative mode of PIM-DM on an interface to enabled.
no ip pimdm (Interface Config)
This command sets administrative mode of PIM-DM on an interface to disabled.
ip pimdm hello-interval
This command configures the transmission frequency of hello messages between PIM enabled
neighbors. This field has a range of 10 to 3600 seconds.
Format no ip pimdm
Mode Global Config
Default disabled
Format ip pimdm
Mode Interface Config
Format no ip pimdm
Mode Interface Config
Default 30
Format ip pimdm hello-interval <seconds>
Mode Interface Config
To Next Page
Loading...
