NETGEAR GSM7228PS - Lldp Notification; Lldp Transmit-Mgmt

Managed Switch CLI Manual, Release 8.0.3
Switching Commands 3-173
v1.0, July 2010
no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without
parameters to remove all optional TLVs from the LLDPDU.
lldp transmit-mgmt
Use this command to include transmission of the local system management address information in
the LLDPDUs.
no lldp transmit-mgmt
Use this command to include transmission of the local system management address information in
the LLDPDUs. Use this command to cancel inclusion of the management information in
LLDPDUs.
lldp notification
Use this command to enable remote data change notifications.
Format no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Format lldp transmit-mgmt
Mode Interface Config
Format no lldp transmit-mgmt
Mode Interface Config
Default disabled
Format lldp notification
Mode Interface Config