Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-18
v1.0, July 2010
no terminal length
Use this command to set the terminal length to the default value.
show terminal length
Use this command to display the value of the user-configured terminal length size.
Logging Commands
This section describes the commands you use to configure system logging, and to view logs and
the logging settings.
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
no logging buffered
This command disables logging to in-memory log.
Format no terminal length
Mode Privileged EXEC
Format show terminal length
Mode Privileged EXEC
Default disabled; critical when enabled
Format logging buffered
Mode Global Config
Format no logging buffered
Mode Global Config
To Next Page
Loading...
