Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-71
v1.0, July 2010
debug ip pimsm packet
Use this command to trace PIMSM packet reception and transmission. receive traces only
received PIMSM packets and transmit traces only transmitted PIMSM packets. When neither
keyword is used in the command, then all PIMSM packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console.
no debug ip pimsm packet
Use this command to disable debug tracing of PIMSM packet reception and transmission.
debug ip vrrp
Use this command to enable VRRP debug protocol messages.
no debug ip vrrp
Use this command to disable VRRP debug protocol messages.
Default disabled
Format debug ip pimsm packet [receive|transmit]
Mode Privileged EXEC
Format no debug ip pimsm packet [receive|transmit]
Mode Privileged EXEC
Default disabled
Format debug ip vrrp
Mode Privileged EXEC
Format no debug ip vrrp
Mode Privileged EXEC
To Next Page
Loading...
