NETGEAR GSM7228PS - Show Stack-Port Counters; Show Stack-Port Diag

Managed Switch CLI Manual, Release 8.0.3
Stacking Commands 2-11
v1.0, July 2010
show stack-port counters
This command displays summary data counter information for all interfaces.
show stack-port diag
This command shows front panel stacking diagnostics for each port and is only intended for Field
Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this
command and capture this information.
Configured Stack
Mode
Stack or Ethernet.
Running Stack
Mode
Stack or Ethernet.
Link Status Status of the link.
Link Speed Speed (Gbps) of the stack port link.
Table 9:
Format show stack-port counters
Mode Privileged EXEC
Term Definition
Unit The unit number.
Interface The slot and port numbers.
Tx Data Rate Trashing data rate in megabits per second on the stacking port.
Tx Error Rate Platform-specific number of transmit errors per second.
Tx Total Error Platform-specific number of total transmit errors since power-up.
Rx Data Rate Receive data rate in megabits per second on the stacking port.
Rx Error Rate Platform-specific number of receive errors per second.
Rx Total Errors Platform-specific number of total receive errors since power-up.
Format show stack-port diag
Mode Privileged EXEC
Term Definition