Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-37
v1.0, July 2010
Example: The following shows example CLI display output for the command.
(Switch) #show ip igmp-proxy
Interface Index............................................. 1/0/1
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ 5.5.5.50
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 00::00:00
Proxy Start Frequency................................. 1
show ip igmp-proxy interface
This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
The column headings of the table associated with the interface are as follows:
Older Version 1
Querier Timeout
The interval used to timeout the older version 1 queriers.
Older Version 2
Querier Timeout
The interval used to timeout the older version 2 queriers.
Proxy Start
Frequency
The number of times the IGMP Proxy has been stopped and started.
Format show ip igmp-proxy interface
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Index The unit/slot/port of the IGMP proxy.
Term Definition
Ver The IGMP version.
Query Rcvd Number of IGMP queries received.
Term Definition
To Next Page
Loading...
