NETGEAR GSM7228PS - Show Radius

Managed Switch CLI Manual, Release 8.0.3
Management Commands 10-59
v1.0, July 2010
no radius server timeout
The no version of this command sets the timeout global parameter to the default value.
show radius
This command displays the values configured for the global parameters of the RADIUS client.
Default 5
Format radius server timeout <seconds>
Mode Global Config
Field Description
retries Maximum number of transmission attempts in the range <1-30>.
Format no radius server timeout
Mode Global Config
Format show radius
Mode Privileged EXEC
Term Definition
Number of Configured
Authentication Servers
The number of RADIUS Authentication servers that have been configured.
Number of Configured
Accounting Servers
The number of RADIUS Accounting servers that have been configured.
Number of Named
Authentication Server
Groups
The number of configured named RADIUS server groups.
Number of Named
Accounting Server
Groups
The number of configured named RADIUS server groups.