NETGEAR GSM7228PS - Show Bootpdhcprelay

Managed Switch CLI Manual, Release 8.0.3
Routing Commands 4-36
v1.0, July 2010
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on
the system.
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format no bootpdhcprelay minwaittime
Mode Global Config
Format show bootpdhcprelay
Modes • Privileged EXEC
• User EXEC
Term Definition
Maximum Hop
Count
The maximum allowable relay agent hops.
Minimum Wait
Time (Seconds)
The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP
Address
The IP address for the BootP/DHCP Relay server.
Circuit Id Option
Mode
The DHCP circuit Id option which may be enabled or disabled.
Requests
Received
The number or requests received.
Requests
Relayed
The number of requests relayed.
Packets
Discarded
The number of packets discarded.