NETGEAR GSM7228PS - Show Ip Dvmrp; Show Ip Dvmrp Interface

Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-9
v1.0, July 2010
show ip dvmrp
This command displays the system-wide information for DVMRP.
The following fields are displayed for each interface.
show ip dvmrp interface
This command displays the interface information for DVMRP on the specified interface.
Format show ip dvmrp
Modes • Privileged EXEC
• User EXEC
Term Definition
Admin Mode Indicates whether DVMRP is enabled or disabled.
Version The version of DVMRP being used.
Total Number of
Routes
The number of routes in the DVMRP routing table.
Reachable
Routes
The number of entries in the routing table with non-infinite metrics.
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.
Interface-Mode The mode of this interface. Possible values are Enabled and Disabled.
Operational-
status
The current state of DVMRP on this interface. Possible values are Operational or Non-
Operational.
Format show ip dvmrp interface <unit/slot/port>
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Mode Indicates whether DVMRP is enabled or disabled on the specified interface.
Metric The metric of this interface. This is a configured value.
Local Address The IP address of the interface.