Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-53
v1.0, July 2010
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools is
displayed.
The following additional field is displayed for Dynamic pool type:
The following additional fields are displayed for Manual pool type:
Format show ip dhcp pool configuration {<name> | all}
Modes • Privileged EXEC
• User EXEC
Field Definition
Pool Name The name of the configured pool.
Pool Type The pool type.
Lease Time The lease expiration time of the IP address assigned to the client.
DNS Servers The list of DNS servers available to the DHCP client .
Default Routers The list of the default routers available to the DHCP client
Field Definition
Network The network number and the mask for the DHCP address pool.
Field Definition
Client Name The name of a DHCP client.
Client Identifier The unique identifier of a DHCP client.
Hardware
Address
The hardware address of a DHCP client.
Hardware
Address Type
The protocol of the hardware platform.
Host The IP address and the mask for a manual binding to a DHCP client.
To Next Page
Loading...
