Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-63
v1.0, July 2010
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions affecting
their managed switch product.
debug arp
Use this command to enable ARP debug protocol messages.
no debug arp
Use this command to disable ARP debug protocol messages.
debug auto-voip
Use this command to enable Auto VOIP debug messages. Use the optional parameters to trace
H323, SCCP, or SIP packets respectively.
Mode Global Config
Default Enabled
Caution! The output of “debug” commands can be long and may adversely affect system
performance.
Default disabled
Format debug arp
Mode Privileged EXEC
Format no debug arp
Mode Privileged EXEC
Default disabled
Format debug auto-voip [H323|SCCP|SIP]
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General
