NETGEAR GSM7228PS - Ip Pimsm Bsr-Border; Ip Pimsm Bsr-Candidate

Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands 5-17
v1.0, July 2010
no ip pimsm(Interface Config)
This command is used to administratively disable PIM-SM multicast routing mode on a particular
router interface.
ip pimsm bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received
through an interface.
no ip pimsm bsr-border
Use this command to disable the interface from being the BSR border.
ip pimsm bsr-candidate
This command is used to configure the router to announce its candidacy as a bootstrap router
(BSR).
Format no ip pimsm
Mode Interface Config
Default disabled
Format ip pimsm bsr-border
Mode Interface Config
Format no ip pimsm bsr-border
Mode Interface Config
Default None
Format ip pimsm bsr-candidate interface <unit/slot/port> [hash-mask-length]
[priority]
Mode Global Config