Managed Switch CLI Manual, Release 8.0.3
Utility Commands 9-23
v1.0, July 2010
show logging traplogs
This command displays SNMP trap events and statistics.
Term Definition
Host Index (Used for deleting hosts.)
IP Address /
Hostname
IP address or hostname of the logging host.
Severity Level The minimum severity to log to the specified address. The possible values are emergency
(0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).
Port The server port number, which is the port on the local host from which syslog messages
are sent.
Host Status The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
Format show logging traplogs
Mode Privileged EXEC
Term Definition
Number of Traps
Since Last Reset
The number of traps since the last boot.
Trap Log
Capacity
The number of traps the system can retain.
Number of Traps
Since Log Last
Viewed
The number of new traps since the command was last executed.
Log The log number.
System Time Up How long the system had been running at the time the trap was sent.
Trap The text of the trap message.
To Next Page
Loading...
Need help?
General
