Managed Switch CLI Manual, Release 8.0.3
IPv6 Commands 7-16
v1.0, July 2010
no ipv6 nd managed-config-flag
This command resets the “managed address configuration” flag in router advertisements to the
default value.
ipv6 nd ns-interval
This command sets the interval between router advertisements for advertised neighbor
solicitations, in milliseconds. An advertised value of 0 means the interval is unspecified.
no ipv6 nd ns-interval
This command resets the neighbor solicit retransmission interval of the specified interface to the
default value.
ipv6 nd other-config-flag
This command sets the “other stateful configuration” flag in router advertisements sent from the
interface.
Default false
Format ipv6 nd managed-config-flag
Mode Interface Config
Format no ipv6 nd managed-config-flag
Mode Interface Config
Default 0
Format ipv6 nd ns-interval {<1000-4294967295> | 0}
Mode Interface Config
Format no ipv6 nd ns-interval
Mode Interface Config
To Next Page
Loading...
